HK UPPERBOND INDUSTRIAL LIMITED
Best One-stop Service Partner
Add to Cart
On-line Laser Perforation Machine Equipment System 3×380V AC 50／60Hz
Technical performance
Operating Voltage:3*380V AC 50／60Hz.
Power Consumption: Max 6km.
Laser Type: K Series CO2 pulsed lasers.
Wavelength: 10.6 μm
Beam Divergence (full angle): ≤ 2.1 mrad
Beam diameter: 7.2 mm
Tube Shelf Life: > 20,000 hours
Pulse Period (minimum): 10μs
Compressed Air Consumption:4.5m3/h
Cooling Water Consumption: 40kg distilled water
Sensing parts
| Code | Category | Function | |
| DCP | Proximity switches | MAX pulse occurs(DCP) | |
| PT100 | Temperature sensor | Monitoring the cooling water temperature | |
| SQ3 | Proximity switches | Check if power meter or focus head in place | |
| RST | Level switch | Check the cooling water level (low level alarm) | |
| B17 | Detection switch | Blocking smoke detector | |
| A64 | Signal processing board | Signal Processing | |
Implementation components
| M1 | Electric fan | Heat exchanger fan (electric components cooling) | |
M2 | Inverter | Drive motor (optional) | |
| M3 | Pump motor | Driving the cooling water pump | |
| DC48 | Laser Power | To the resonant cavity and the RF power amplifier | |
| HEAD | Resonator | Emitting laser | |
